Slurry and Solids Handling

M hard metal Abrasive Slurry
M hard metal Abrasive Slurry

Standards • Flowserve Operating Parameters • Flows to 10 000 m3/h (44 000 gpm) • Heads to 90 m (300 ft) • Pressures to 10 bar (150 psi); 50 bar (725 psi) with the highpressure model • Temperatures to 120°C (250°F) • Solids from 2% to 70% by weight Features • One-piece high chrome iron, concentric casing with replaceable gland and suction side wear plates • Closed impeller with pump-out vanes on front and rear shrouds • Standard packing stuffing box with replaceable wear plate • Full and low-flow

press to zoom
Radially Split Rubber Lined Slurry
Radially Split Rubber Lined Slurry

Standards • Flowserve Operating Parameters • Flows to 10 000 m3/h (44 000 gpm) • Heads to 50 m (165 ft) • Pressures to 10 bar (150 psi) standard; 35 bar (510 psi) optional • Temperatures to 110°C (225°F) • Solids from 2% to 70% by weight Features • Concentric, cast iron casing with replaceable, abrasion resistant rubber liner • Rubber lined, closed impeller with front and rear pump-out vanes • Standard packing stuffing box with replaceable wear plate • Full and low-flow flush connections

press to zoom
Titan Slurry Heavy-Duty,
Titan Slurry Heavy-Duty,

Standards • Flowserve Operating Parameters • Flows to 3600 m3/h (16 000 gpm) • Heads to 90 m (300 ft) • Pressures to 40 bar (580 psi) • Sizes from 50 mm (2 in) to 350 mm (14 in) Features • Fully interchangeable elastomeric or hard metal liners • Radially split casing • High-efficiency, closed impeller • Ample seal chamber accommodates a variety of packing and seal types • Heavy-duty bearing frame sized to handle belt loads • Bearing cartridge with back-to-back angular contact thrust bearings

press to zoom
MNR Rubber Lined Abr
MNR Rubber Lined Abr
press to zoom
MND Hard Metal Absorber
MND Hard Metal Absorber

Standards • Flowserve Operating Parameters • Flows to 17 500 m3/h (77 000 gpm) • Heads to 40 m (130 ft) • Sizes from 600 mm (24 in) to 1000 mm (40 in) Features • One-piece, high-efficiency impeller with mixed flow vane design • Multiple materials of construction • Replaceable casing wear ring • Opposed tapered roller bearings designed for a minimum B10 life of 100 000 hours

press to zoom
LC Chemical Slurry
LC Chemical Slurry

Standards • Flowserve Operating Parameters • Flows to 8000 m3/h (35 200 gpm) • Heads to 90 m (300 ft) • Pressures to 25 bar (360 psi) • Temperatures to 140°C (285°F) • Specific gravities to 1.7 Features • Concentric casing with tangential discharge • Rigid, one-piece bearing frame with two angular contact outboard bearings and roller inboard bearings • Large diameter, heavy-duty shaft • Choice of shaft sealing options – Wet gland packing – Single or double mechanical seal – High-pressure double

press to zoom
FRBH Heavy-Duty Paper Stock
FRBH Heavy-Duty Paper Stock

Standards • Flowserve Operating Parameters • Flows to 9085 m3/h (40 000 gpm) • Heads to 100 m (330 ft) • Pressures to 14 bar (200 psi) • Temperatures to 150°C (300°F) Features • Self-venting, top centerline discharge casing • Semi-open, full vane impeller with back pump-out vanes • Large suction inlet • Seal chamber accepts packing or mechanical seal • Three-point end clearance adjustment • Back pullout design • Heavy-duty oil-lubricated bearings

press to zoom
FRBHJC Cantilever Sump
FRBHJC Cantilever Sump

Standards • Flowserve Operating Parameters • Flows to 2700 m3/h (12 000 gpm) • Heads to 100 m (330 ft) • Temperatures to 150°C (300°F) • Speeds to 1780 rpm Features • True stiff shaft cantilever design, without bottom bearing or flushing water • Steep head-capacity • Semi-open, full vane impeller with back pump-out vanes • Direct coupled or V-belt driven

press to zoom
MPT Self-Priming, Solids Handling
MPT Self-Priming, Solids Handling

Standards • Flowserve Operating Parameters • Flows to 600 m3/h (2650 gpm) • Heads to 35 m (115 ft) • Temperatures to 75°C (165°F) • Working pressures to 5 bar (72 psi) • Sizes 50 to 200 mm (2 to 8 in) • Solids to 75 mm (3 in) diameter Features • Two-vane, semi-open, solids handling impeller • External impeller adjustment • Abrasion resistant double mechanical seal • Quick-disconnect cover plate

press to zoom