Industrial Process

D800 Series Cast Iron
D800 Series Cast Iron

Standards • Flowserve Operating Parameters • Flows to 340 m3/h (1500 gpm) • Heads to 120 m (395 ft) • Pressures to 15 bar (220 psi) • Temperatures to 120°C (250°F) Features • High-efficiency closed impeller • Centerline discharge • Sealed-for-life, pre-lubricated motor bearings with two-year minimum life • Renewable wear rings and shaft sleeves • Pre-set mechanical seal assembly • Bell-type mechanical seal cover • Standard NEMA C-face motor • Back pullout design

press to zoom
MEN End Suction
MEN End Suction

Standards • DIN 24255 • EN 733 • Flowserve Operating Parameters • Flows to 800 m3/h (3520 gpm) • Heads to 140 m (450 ft) • Pressures to 16 bar (230 psi) • Temperatures to 120°C (250°F) Features • 33 sizes available • Volute casing with top discharge • Dynamically balanced, precision cast closed impeller with extended hub and machined shroud • Impeller balance chamber and holes minimize axial thrust • Open seal chamber with integral vortex breaking ribs • Oversized stainless steel shaft • Oversiz

press to zoom
MENBloc Close Coupled
MENBloc Close Coupled

Standards • DIN 24255 • EN 733 • Flowserve Operating Parameters • Flows to 340 m3/h (1500 gpm) • Heads to 100 m (330 ft) • Pressures to 16 bar (230 psi) • Temperatures to 110°C (230°F) Features • Compact, space-saving configuration • End suction, top discharge, volute casing • Dynamically balanced, precision cast high-efficiency closed impeller with extended hub • Impeller balance chamber and holes minimize axial thrust • Open seal chamber with integral vortex breaking ribs • Oversized stainless

press to zoom
DS Double Volute, End Suction
DS Double Volute, End Suction

Standards • Flowserve Operating Parameters • Flows to 5700 m3/h (25 000 gpm) • Heads to 110 m (350 ft) • Pressures to 27 bar (400 psi) • Temperatures to 120°C (250°F) Features • Double volute, end suction casing with centerline discharge • Mechanically balanced, radial flow impeller • Impeller balance holes minimize axial thrust • Seal chamber accommodates packing and multiple mechanical seal types • Back pullout design • Angular contact thrust bearing and parallel roller radial bearing

press to zoom
ME End Suction
ME End Suction

Standards • Flowserve Operating Parameters • Flows to 3000 m3/h (13 200 gpm) • Heads to 90 m (295 ft) • Pressures from 4 to 16 bar (58 to 232 psi) • Temperatures to 120°C (250°F) Features • Single volute, end suction casing with tangential discharge • Back pullout design • Radial flow impeller shrouded, keyed on shaft • Impeller balance holes minimize axial thrust • Bearings −−Radial ball bearing and roller bearings (depending on size)

press to zoom
SMP Standard Motor
SMP Standard Motor

Standards • Flowserve Operating Parameters • Flows to 135 m3/h (600 gpm) • Heads to 70 m (220 ft) • Pressures to 12 bar (175 psi) • Temperatures from -40°C (-40°F) to 120°C (250°F) Features • Glass reinforced polymer, highefficiency, semi-open or closed impellers standard • Industry standard NEMA motors • Stainless steel, self-aligned mechanical seal • Back pullout design • Clamp-type mounting plate • Options – Cast iron, bronze or 316 stainless steel impellers – Stub shaft design

press to zoom
SMX Non-Metallic Standard Motor
SMX Non-Metallic Standard Motor

Standards • Flowserve Operating Parameters • Flows to 25 m3/h (100 gpm) • Heads to 20 m (60 ft) • Pressures to 12 bar (175 psi) • Temperatures to 80°C (180°F) Features • Polyphenylene sulfide (PPS) casing, adapter and impeller • Standard NEMA 56J frame C-faced motor • Stainless steel, self-aligned mechanical seal • Back pullout design • 40 mm (1.5 in) port size for hose connection

press to zoom
F-Line End Suction, Multistage
F-Line End Suction, Multistage

Standards • Flowserve Operating Parameters • Flows to 500 m3/h (2200 gpm) • Heads to 250 m (820 ft) • Discharge pressures to 25 bar (365 psi) • Temperatures to 105°C (220°F) Features • Modular design – 8 sizes – 15 hydraulics – 2 impeller types • To 9 stages, depending on model and operating speed • Sleeved shaft under sealing system • Cast iron EN-GJL 250 pressure casings

press to zoom
MVE End Suction
MVE End Suction

Standards • Flowserve Operating Parameters • Flows to 2700 m3/h (11 890 gpm) • Heads to 15 m (50 ft) • Pressures to 7 bar (100 psi) • Temperatures to 100°C (212°F) Features • Single volute casing with end suction and side discharge; top discharge optional • Mechanically balanced, mixed flow impeller • Seal chamber accommodates packing and multiple mechanical seal types • Back pullout design • Standard angular contact radial and thrust bearings

press to zoom